The design and construction of clean technologies in the automotive industry is rapidly developing gaining. Many large machine-building plants and companies such as Volvo, Renault, Peugeot, Daimler Motor Company and others use clean rooms at many production stages, which allows to increase the term for the production of parts and increase the strength of the mechanisms.
CLEAN ROOMS IN AUTOMOBILE PRODUCTION：SPECIFIC DETAILES
Technological processes associated with the use of paint and varnish materials and coatings in the automotive industry are associated with two types of contamination:
- Pollution caused by the process itself;
- Pollution, the source of which is the person who makes the operation.
The contamination of the surrounding production processes of the environment often causes defects, adhesion of coloring materials, corrosion. Controlling the amount of aerosol contaminants in the air can be achieved through the design of laminar hoods, laminar cabins and clean zones,
And filtration systems that do not allow or minimize the possibility of penetration of foreign particles into the working zone.
APPLICATION OF CLEAN ROOMS IN THE AUTOMOTIVE INDUSTRY IS APPROVED BY THE FOLLOWING OPERATIONS:
Production and assembly of parts with depressions and hard-to-reach cavities (internal shaft surfaces and hydraulic gearboxes). Manufacture of such parts takes place in compliance with clean technologies, including the cleanliness of both airspace and used liquids.
Coloring of car surfaces. Since this process is sensitive to the presence of particles of carbon steel and other contaminants in the air, a settled particle with a size of 1 μm forms a “grain” in 10-20 μm. Thus, with the help of clean rooms it is possible not only to protect the painted surface from permanent inclusions, but also to protect the working area from volatile substances. As a rule, the ISO 6 class of cleanliness is defined inside the paint room, and in the adjacent rooms have ISO class 7.
CLEAN ROOMS FOR AUTOMOTIVE INDUSTRY UNDER THE TURN KEY FROM SANBELA
SanBela carries out a full range of works on the design and construction of cleanrooms used in the automotive industry, taking into account all technological requirements. For 11 years of work, our company’s specialists have successfully implemented and put into operation many projects both in the CIS and in the EU countries.
Manufacturing of structures is carried out on our own production line in strict accordance with generally accepted GMP and GOST standards, which allows us to provide customers with a competitive price for clean rooms in the automotive industry. For ordering products, obtaining detailed information and calculating estimates, leave a request through the feedback form or mail box.